Skip to content Skip to sidebar Skip to footer

Qmobile A30 Flash File

Initial Steps to Install Firmware on Qmobile Noir A30

  1. Download and install MTK  android USB drivers

  2. Download And Install SP Flash Tool

How To Flash Qmobile Noir A30

  1. First, you need to download and install SP flash tool

  2. Download and install MTK  android USB drivers

  3. Then download Firmware file/Flash file/Rom for your phone

  4. Your phone must have 50 % charging before this process,

  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket

  6. Now open SP flash tool.exe

  7. When SP flash tool open, go to download button in SP flash tool

  8. In download tab, click on scatter load button

  9. After locating the scatter tab, click on the download button

  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)

  11. Now flashing is completed, a green ring will appear in SP flash tool

  12. Close SP flash tool on your computer and unplug phone

  13. Power on the phone and enjoy

  14. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

Download Now

Post a Comment for "Qmobile A30 Flash File"