Join us Family on Telegram
Whatsapp YouTube

Vnus S20 Firmware Free Download

vnus s20 hang on logo vnus s20 first logo hang vnus s20 firmware vnus s20 flash file vnus s20 frp remove

VNUS S20 Flash File Fee Download Read CM2 Dongle 




File Information

Device Name: VNUS S20
Model Number: S20
Brand: VNUS Mobile
Android: 6.0
Country: USA/All
File: VNUS S20 Flash File
File Type: CM2SP2 Supported
Chip Type: SC7731G
Password: No Password Protected 






Download Link:  Mega.nz  MediaFire  doodrive.com   mirrorace   Direct  



File Solve This Problem's

vnus s20 hang on logo
vnus s20 first logo hang
vnus s20 firmware
vnus s20 flash file
vnus s20 frp remove



Flashing Required

CM2 Dongle
CM2SP2 Latest Version 
SPD Latest USB Drivers


CM2SP2 Identify Device Information 

Operation : Identify [ v2.10 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
Kick FDL again ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MRA58K
Display ID     : J106G_VNUS_Sun S20_B15_V001_20191224
Ver. Incmt     : root-103233
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-07-01
Build Time     : 24.12.2019
Product Brand  : VNUS
Product Name   : sp7731g_1h10_hd_oversea
Product Device : sp7731g_1h10
Product Board  : sp7731gea_hdr
Product Manfct : VNUS
Board Platform : sc8830
Product Info   : sp7731g_1h10
Product Model  : Sun S20


NVMng  : SecurityInfo 
IMEI[1] : 
IMEI[2] : 
IMEI[3] : 
WIFIMAC : 002715EEECD5
BT_MAC  : 092125102020
SEC : SLS:0, SKS:0, SKV:0

Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version:   sc7731g_CP0_modem
BASE  Version:    TM_BASE_W17.22.4
MMI Version:       sc7731g_modem
HW Version:        sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_modem

UserData : STATE : PLAIN [EXTFS]

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:48


CM2SP2 Read Firmware Information

Operation : Read FW [ v2.10 ]
Extra : Ignore CriticalPart Verify : Enabled


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!


Wait for device ...


Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!


Boot Done!


Device info :
Patch Level : MRA58K
Display ID : J106G_VNUS_Sun S20_B15_V001_20191224
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 24.12.2019
Product Brand : VNUS
Product Name : sp7731g_1h10_hd_oversea
Product Device : sp7731g_1h10
Product Board : sp7731gea_hdr
Product Manfct : VNUS
Board Platform : sc8830
Product Info : sp7731g_1h10
Product Model : Sun S20


AndroidVer : 6
VlnrLevel : 0x01


SC8830__VNUS__Sun_S20__6.0__J106G_VNUS_Sun_S20_B15_V001_20191224__MRA58K__sp7731g_1h10


Read : prodnv.img
ExtSparse : Compression ratio : 83%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : logo2.bin
Read : logo3.bin
Read : logo4.bin
Read : logo5.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 87%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 4%
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin


Firmware size : 0x4B40FC80 ( 1.18 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:07:11


Open : SPD_PROG.xml
Reading package ...
Read package finished!


Post a Comment

Thank You For Your Feedback 🔍
Post a Comment
Cookie Consent
We serve cookies on this site to analyze traffic, remember your preferences, and optimize your experience.
Oops!
It seems there is something wrong with your internet connection. Please connect to the internet and start browsing again.